pH - Conductivity - TDS - ORP Electrode

 

 Conductivity K=1 and K=0.1 Electrode  3/4 Inch

 

pH electrode holder designed to hold a pH electrode in place within pipework to give online pH measurements.

 

 

FZ300 Multi Parameter monitor & Controllers

 

The FZ200 measuring system is a compact unit for measurement, storage and transmission of parameters in laboratories and pilot plant stations.

 

Parameters:

  pH

 Dissolved oxygen

 Redox potential (ORP)

 Conductivity

 Temperature

 Nitrate

 Ammonium

 Chloride

 Turbidity

 Carbon dioxide

 Bromide

 

 Inputs:

Analog inputs

Outputs:

Alarm relay -  adjustable high-low points

Analog output 4…20 mA and programmable

RS 485 communication

Data logger

USB interface

 

 

 

 

ROC-200 Reverse Osmosis Controller

 

The FZ-200 Reverse Osmosis Controller is designed to control and monitor the operating parameters of a reverse osmosis water purification system.

 

Features:

Conductivity Monitor

Three Modes of Operation: Stand-by, Tank Feed, and Direct Feed

Tank Full Shutdown

Inlet Valve Control

Pump Control

Low Feed Pressure Sensing

High Pressure Sensing

Auto flush with Adjustable Flush Time

 

Description

pH - Conductivity - TDS - ORP - Flow

  • Automatic calibration
  • Manual Temperature Compensation MTC
  • Two separate commands for starting the solenoid valve, pump or contactor up to 2 Amps 250 volts
  • Display specifications E0, Slope electrode
  • Ability to select two-point calibration or three-point calibration
  • ability to install the device up to 200 meters away from the process location (according to the order)

 

User manuals :

 

pH                                        Click here for the CNT100FPH-W English version of the manual

Conductivity  Click here for the CNT100FCond-W  English version of the manual

TDS                       Click here for the CNT100FTDS-W  English version of the manual

ORP              Click here for the CNT100FORP-W  English version of the manual

 

 

Description

pH - Conductivity - TDS - ORP - Flow

  • Automatic calibration
  • MTC - Manual Temperature Compensation
  • Two separate commands for starting the solenoid valve, pump or contactctr up to 2  Amps 250 volts 

  •  4 up to 20 mA or 0 up to 20 mA Analog output non-isolated

 

User manuals :

 

pH                                        Click here for the CNT100FPH-W English version of the manual

Conductivity  Click here for the CNT100FCond-W  English version of the manual

TDS                       Click here for the CNT100FTDS-W  English version of the manual

ORP              Click here for the CNT100FORP-W  English version of the manual